cyclic stress的例句大全

The surface fatigue is induced by cyclic stress.

循环变化的接触应力产生的表面疲劳磨损机理。

Experimental study on shearing deformation behavior of saturated clay under cyclic stress

循环应力下饱和黏土剪切变形特性试验研究

Relationship of cyclic stress-strain and damage for low-cycle fatigue

低周循环应力&应变关系和损伤

Experimental investigation on the cyclic stress ─ strain characteristics of 0.35% carbon steel

35钢循环应力应变特性的实验研究

Study on Cyclic Stress Relaxation Mechanism of Elastic Material

弹性材料动态应力松弛机理的研究

Probability-based cyclic stress-strain curves and estimation method

概率循环应力&应变曲线及其估计方法

Study on Cyclic Stress Strain Relation Under Tension Torsion Complex Loading

拉扭复合加载下循环应力应变关系的研究

It was found that tension residual stress is key factor for crack growth under cyclic compression.

结果表明,裂尖区域在循环压缩载荷作用下的残余拉伸应力是导致裂纹扩展的重要因素.

It is justified that the maximum cyclic shear effect plane of the specimens in triaxial liquefaction test and-simple shea'r liquefaction test and of soil elements under general plane strain condition can only be determined by static stress components and is undependent on cyclic stress.

对于三轴液化试验、简切液化试验的受力条件和平面应变状态下土单元的受力条件，证明了最大往返剪切作用面的位置只由静力有效应力分量来确定而与往返应力无关。

( b) For concrete in compression zone a stress-strain relation for repeated axial compressive cyclic loading, is adopted instead of that for reversed loading.

对混凝土受压区采用轴向重复加载的应力-应变关系而不是反复加载的。

Through a series of dynamic triaxial tests, the failure stress condition on the maximum cyclic shear surface was discussed.

通过一系列的动三轴试验，探讨以应变为破坏标准的最大往返剪切作用面上的破坏应力条件。

The Failure Stress Condition on the Maximum Cyclic Shear Surface Associated with the Failure Stain Criterion of Flyash

粉煤灰最大往返剪切作用面上应变破坏标准的应力条件

In the constant load and live load under the action of shear pin, and the circumferential weld will withstand high amplitude of cyclic stress, the strength and fatigue problem should cause height to take seriously.

在恒载和活载的作用下，剪力销以及其周边焊缝将承受幅值较高的应力循环，其强度和疲劳问题应引起高度重视。

Anelastic relaxation, cyclic creep and stress rupture of particle strengthened Superalloys

粒子强化高温合金的滞弹性松弛、循环蠕变和应力断裂行为

The effects of the stress ratio in the cyclic loading and the environment medium were studied.

同时研究了循环加载中的应力比以及环境介质对于疲劳裂纹扩展的影响.

The test results show that the fatigue property curve and the cyclic stress-strain curve of LZ50 axletree steel perfectly conform to double logarithm linear relationship.

试验结果表明：LZ50车轴钢的循环疲劳特性曲线及循环应力-应变曲线很好地符合双对数线性关系；

Liquefaction of sand under bi-directional cyclic loading CALCULATION OF SHEARING STRESS FOR AXIAL DRAWING OF TRANSFORM SECTION BAR

饱和松砂的双向耦合剪切特性试验研究变截面直杆轴向拉伸时的剪应力计算